
Your existing concrete can become a high-gloss, one-of-a-kind floor. We moisture-test every slab and use UV-stable topcoats designed for Key Biscayne's salt air and strong Florida sun.

Metallic epoxy flooring in Key Biscayne transforms an ordinary concrete slab into a glossy, custom surface with a swirling, three-dimensional look - most residential installs run two to three days on-site from grinding to final topcoat.
If your garage, living area, or ground-floor room has a concrete slab underneath - which is almost every home on Key Biscayne - metallic epoxy is a practical upgrade. The finish is non-porous, easy to clean, and handles the salt air and humidity that break down bare concrete over time. Many homeowners explore this option alongside epoxy floor coatings when deciding which system fits their space.
Because no two applications turn out exactly alike, you get a floor that looks custom rather than off-the-shelf - without tearing out your existing slab and starting over.
If oil stains, rust marks, or a grayish film that mops won't touch have settled into your slab, the concrete has absorbed them. Metallic epoxy seals the surface completely, so future spills sit on top and wipe away instead of soaking in. This is one of the most common reasons Key Biscayne homeowners call us.
That chalky residue is efflorescence - moisture pushing up through the slab and depositing minerals as it evaporates. In Key Biscayne's high-water-table environment this is extremely common, and it signals that any contractor needs to test for moisture before applying anything new. Skipping that step leads to bubbling and peeling within months.
If a previous paint or epoxy coating is lifting in patches, the original prep work was inadequate or moisture got underneath. Before anything new goes down, the old coating has to come off and the concrete properly prepared. This is exactly the moment to upgrade to a metallic epoxy system that will actually hold.
Key Biscayne sits at very low elevation, and heavy rain events push moisture up through slabs in garages and ground-floor spaces. If your floor feels cool and slightly damp after a storm, or you notice a musty smell that lingers, moisture is moving through the concrete. Addressing this before any coating is essential.
We install metallic epoxy systems in garages, living areas, kitchens, and commercial spaces across Key Biscayne and the surrounding communities. Every project starts with a full moisture test and mechanical grinding - the preparation work that determines whether your floor lasts five years or twenty. For spaces that need a different level of chemical or heat resistance, we also install urethane cement flooring, which handles extreme environments that standard epoxy is not designed for.
Each metallic floor is unique because the installer's technique - how the pigment is worked into the wet base coat using rollers and squeegees - shapes the final pattern. You can choose from a wide range of metallic tones, and we apply a clear protective topcoat as the last step. If you have a large home with multiple floor areas, we can discuss which coating system makes the most sense for each space, including standard epoxy floor coatings for rooms where a solid color is a better fit.
Ideal for homeowners updating a garage, laundry room, or living area who want a high-gloss, custom finish without a full-home project.
Suited for renovation projects where multiple ground-floor rooms share a concrete slab and a consistent floor finish is the goal.
Recommended for rooms with direct sun exposure through large windows or glass doors - prevents yellowing and keeps the finish sharp for years.
For slabs with elevated moisture readings, a primer barrier is applied before the epoxy goes down - the right approach for most Key Biscayne homes.
Key Biscayne is surrounded by saltwater on all sides, and the salt-laden air that comes off Biscayne Bay and the Atlantic degrades unprotected surfaces faster than in any inland part of Florida. Standard floor paints and thin coatings lose adhesion and chalk out - metallic epoxy with a quality topcoat creates a sealed, non-porous surface that gives salt and moisture nowhere to penetrate. The flat lots and high water table on the island also mean that concrete slabs here are almost always managing moisture from below, which is exactly why we moisture-test every slab before we start. We serve homeowners throughout Key Biscayne, as well as neighbors in Coral Gables and Coconut Grove.
The homes on Key Biscayne are serious investments, and many have open-plan layouts with contemporary finishes where a gray concrete floor or peeling paint simply does not fit. Metallic epoxy delivers a high-end look - similar to what you would see in a luxury condo or boutique hotel - without the cost or disruption of tearing out the existing slab. South Florida's hurricane season also creates a rush on flooring projects from November through March, so booking two to four weeks ahead during that window is the best way to secure a crew.
Reach out by phone or the contact form - we reply within one business day. We ask a few basic questions about the space and then schedule a free on-site visit, because no honest estimate can be given from a photo alone.
During the walkthrough we inspect the concrete for cracks, old coatings, and moisture. In Key Biscayne we run a moisture test on every slab, because the local water table makes this a real and common concern. You get a written quote and a clear timeline before anything is agreed.
The crew grinds the concrete using heavy equipment to open the surface so the epoxy bonds properly, then fills any cracks or low spots. This step is loud and creates dust, but the crew uses industrial vacuums to contain it. Good prep is what separates a floor that lasts from one that peels.
The metallic base coat goes on, the installer works the pigment to create the pattern, and a clear protective topcoat seals everything. The floor needs 24 hours before foot traffic and 72 hours before heavy items go back. We walk the space with you before we leave so any concerns are addressed on-site.
Free on-site estimate. Moisture testing included. No pressure, no surprises on the final invoice.
(645) 300-7771Before we apply anything, we test your concrete for moisture vapor emission. In Key Biscayne's high-water-table environment this is not optional - it is the step that determines whether your floor holds for a decade or starts peeling within months. Many contractors skip it.
Standard epoxy can yellow under direct sunlight, which is a real issue in Key Biscayne homes with large windows and open layouts. We specify UV-stable topcoats as a standard part of our system for sun-exposed spaces. The Decorative Concrete Council, part of the American Society of Concrete Contractors, sets industry standards we follow for topcoat selection.
We give you a written estimate that covers surface preparation, crack repair, the coating system, and cleanup. No item appears on the final invoice that was not in the original quote. If we find something unexpected during prep, we tell you before we proceed - not after.
We work on properties across Key Biscayne and know the island's logistical realities - causeway traffic, tight lots, and HOA guidelines for visible exterior finishes. Interior floors almost never require HOA review, but we flag anything that might before work begins.
We have built our work around the specific conditions that affect floors on this island - the moisture, the salt air, the sun - and everything we do reflects that. When you hire us, you get a crew that shows up knowing what Key Biscayne demands.
Verify contractor licensing through the Florida Department of Business and Professional Regulation before hiring any flooring contractor in Key Biscayne.
A seamless, chemical-resistant coating built for garages and utility spaces that face heat, moisture, and heavy use.
Learn MoreSolid-color epoxy systems that protect concrete slabs throughout your home with a clean, durable finish.
Learn MoreContractor slots fill fast after storm season - reach out now to lock in your date before the winter rush.